Digital Type Tension Meter For Tension Control System In Packing
Key intelligently set zero, scaling, operation simple convenient.
1. Can select left /right total tension display.
2. Adapt SMT ,small size,light weight.
3. Tension controller with STS ans STSA for option.
4. Hardware and software to restrain power frequency interference,
output steady and reliable.
5. Bedded installation,easy and convenient .
Attention:STM-050 tension meter only display tension,no control
signal output,other functions same as STM-10PD.
|Power Supply||DC 24V|
|Input Analog singal||1. L+~L-;R+~R-;Left,right tension loadcell signal input|
|STS tension loadcell signal (0~200mv,power supply DC5V)|
|STSA tension loadcell signal(0~15mv;power supply DC5v)|
|Control output||1. Vout-GND:DC0~10V/0~5V|
|(STM-050 without Vout,Iout output)|
|Tension Display||L+R Total tension L: left tension R:right tension|
|Fixed output||5V+-GND:DC5V tension loadcell power supply|
Work with loadcell as below:
|Power supply||DC5V~12V||Comprehensive||≤±0.5% F.S|
|Output Signal||0~20MV||Temperature Range||‘-20℃~+70℃|
|Input Resistance||380±2Ω||Temperature coefficient||≤±0.03% F.S/10℃|
|Output Resistance||350±2Ω||Zero Output||≤±1% F.S|
|Rated stroke||3kg~600kg||Safety Overload||150% F.S|
|Electric connection||Power + red,power - green Signal + yellow Signal - White|
1. The mass of detected reel is too large,the rated value of the
tension detector is too small,both will cause the fault alarm of
signal is too large.
2. C11 parameter value is not match with the actual tension sensor
type,it will cause the fault alarm of signal too large or signal
3. The wrap angle of film overt detector reel is too large,the
force caused by film tension point to the screw ends of tension
detector,ot will cause the fault alarm of signal is too small.
4. The tension sensor connect is not correct,fropped or
damaged,left amd right pressure is imbalance,it will cause the
5. The load id too large will caused the fault alarm of "more than
We supply tension control system and web guiding system for about
20 years already.Cooperate with Wuhan University and our engineer
are powerfull and professinal.Even Mitsubishi bought from us and
said our quality is amazing and price low.
After all the efforts of our man about 2/3 market in China is ours
now and we want to enlarge our market abroad,with high quality and
low price,we wellcome all customer judge and test us.
Our warranty is 2 years,that mean any products failed within 2
years,we will replace or repaire for free.
Quality is our llife and we always try our best to make according
to your requirements.
If you have any other questions,please call us free!