Sign In | Join Free | My pysqlite.org
pysqlite.org
Wu Han Micro Control Electric Co., Ltd.
Wu Han Micro Control Electric Co., Ltd. High aspirations,Customer orientation,Honest and trustworthy,Solidarity and collaboration !
Home > Tension Amplifier >

Analog Signal Tension Amplifier DC24V With Two Load Sensors High Precision

Analog Signal Tension Amplifier DC24V With Two Load Sensors High Precision

Brand Name : True Engin
Model Number : STA-05B
Certification : ISO9001
Place of Origin : China,Hubei
MOQ : 1 UNIT
Price : Negotiate
Payment Terms : T/T, L/C, Western Union
Supply Ability : 10000 units/month
Delivery Time : 1~3 days
Packaging Details : Carton
Colour : Green
Size : 115*100*23mm
Power : DC 24 V
Fixed Output : DC 5 V
Signal : Analog signal
Warranty : 2 years
Lead time : 1 unit
Contact Now

Measuring Amplifiers Tension Amplifier DC24V Connecting Two Load Sensors In Printing Machine


Measuring amplifiers ensure a stable bridge supply voltage, They amplify the output signal of the load sensors to a standard signal .


STA-05 Intelligent tension transducer


Features:


1. Key intelligent operation,outside without adjust potentiometer.

2. Hardware and software to restrain power frequency interference, output steady and reliable.

3. Adapt DIN-rail mounting,easy and convenient.

4. Adapt SMT,small size,light weight.

5. Tension controller with STS ans STSA for option.


Parameters
ModelSTA-05CSTA-05B
Power SupplyDC 24V
Input Analog singalL+~L-;R+~R-;Left,right STS tension loadcell signal (0~200mv,power supply DC5V)L+~L-;R+~R-;Left,right STSA tension loadcell signal (0~15mv;power supply DC5v)
Control output1. Vout-GND:DC0~10V/0~5V
2. Iout-GND:DC0~20mA
Fixed output5V+-GND:DC5V tension loadcell power supply
Outline size115x100x23

Features:


32 bit CPU guarantees high speed, precision, ant-ijamming capability and ensures reliability.


The outside has no adjustable potentiometer.


The tension sensor can select Differential sensor or Strain- gauge sensor.


0~ 10V/ 0~ 5V and 0~ 20mA output signals can be p-rovided to PLC and display instrument.


Use dispensing technology, small volume, light wei-ght.


Using DIN rail mounting, simple and convenient.


Product category:


STA - 05B : Using strain - gauge sensor , input signal r - ange - 5mv ~ + 10mv.

STA - 05C : Using differential sensor , input signal ran - ge - 100mv~ + 200mv


Notes of Using Tension Detector


1. Set screws A and B should not be too long when the bearing houses are installed on the detector. Other-wisethe force could not cause relevant deformations and displacements on the detector. Use spherical u-niversal bearing houses to avoid the detectors on b-oth sides interacting on each other, causing errors on calibration.


2. The wrap angle of film over detector reel shouldn’t be larger than 120, around 60°would be perfect. The s-ignal detected by detector would be too weak to con-trol tension effectively with a large wrap angle.


3. The load force caused by film tension should not poi-nt to the screw ends of tension detector. Otherwise t-here will be very low or even no output.


4. The screw ends of tension detector should point upw-ards when installed on a wall.


5. If the film is pulled cross the reel from below, the fo-rce caused by film tension pulls but not pushes the tension detector. So the negative and positive detec-tor signal wires should exchange when connected to the controller terminals.


  • LED2 turns red, LED1,LED3 red twinkle, there are se-

veral ways as follows:


[ 1] Tension sensor connection drops or poor contact. LED1 twinkle shows left tension sensor has problem, LED3 twinkle shows right tensioin sensor has problem, ple-ase check sensor connection.


[2] The difference of signal between left sensor and right sensor is too large. When the LED twinkle , it shows the sensorsignal is too small,please ajust the sensor or change it.


  • LED2 turns green,LED1,LED3 alternately twinkle,it shows zero alignment and calibration has problem,t-his reason refer to part 9.

  • . Zero calibration operation:

  • . Machine power off, there is no film or film is loose.

  • . Press “Zero alignment” button for 3~5 sec,LED1 tu-rns on.

  • . When LED1 starts twinkle,loosen “Zero alignment” button,the twinkle stops,LED1 turns off, so complete zero alignment.


STA-05 Tension signal amplifier.pdf


Product Tags:

load cell signal amplifier

      

load cell amplifier

      
China Customized Inflatable Bumper Ball Game Bubble Adult Grass CE supplier

Analog Signal Tension Amplifier DC24V With Two Load Sensors High Precision Images

Inquiry Cart 0

Home| Products| Suppliers| Quality Suppliers| Site Map |About Us |Contact Us |Help |关于我们 |联系我们

Copyright © 2009 - 2018 pysqlite.org. All rights reserved.